Filter
Top Products
Printing Problems
Problem
The printer does not
print or stops
printing.
The
ON LINE
light is
on but the printer
doesn’t print anything.
Solution
The interface cable may not be plugged
in securely. Check both ends of the cable.
If you are using a parallel interface,
secure the connector using the wire
retaining clips.
The software may not be installed
properly for your printer. Use the
program’s setup or install procedure to
check the printer settings and make any
necessary changes. Make sure the printer
emulation mode you select (HP LaserJet,
FX, or LQ) matches your program’s
printer driver.
You may not be using the correct
interface cable. Make sure that your
interface cable meets both the printer and
computer specifications. See Chapter 7
and your computer manual.
You may not have selected the correct
interface with SelecType. Make sure that
the interface setting in SelecType matches
your interface. Also, check to see that
the interface is configured correctly for
use with your computer. See Chapter 1
and 2.
Troubleshooting
6-19