Filter
Top Products
Available Printer Modes
The EPI-4000 is factory set to LaserJet series II emulation mode and
this factory setting gives you the fullest range of features. Simply
leave the printer in HP emulation mode and choose one of the
printers below from your program’s setup menu. They are listed in
order of preference.
HP LaserJet series II™ or HP LaserJet 2000™
HP LaserJet Plus™
HP LaserJet 500™
HP LaserJet™
Note: If you use 11 x 17-inch (ledger or B) size paper for most of
your printing jobs, choose the HP LaserJet 2000. For more about
HP emulation mode, see Chapter 1.
The application program’s menu may list a number of more specific
choices corresponding to various HP LaserJet font cartridges. (The
choices are labeled with capital letters, such as A, B, or C.)
Fonts and Font Cartridges
There are six resident fonts in your printer. These correspond to the
resident fonts for the HP LaserJet series II printer. They are:
Courier
12 point
Courier
12 point
Courier bold
12 point
Courier bold
12 point
Line printer
8.5 point
Line printer
8.5 point
Portrait
Landscape
Portrait
Landscape
Portrait
Landscape
In addition, the slots on your printer accept a wide variety of other
fonts available on font cards.
Modes and Commands
B-3