Filter
Top Products
Paper Handling
Problem Solution
The printer does not
feed paper properly
(continued).
The ON LINE light is
off.
The printer feeds
the paper crookedly
or causes the paper
to jam.
Paper is fed crookedly
into the printer.
The paper stops feeding
and PJ appears on the
display.
The printer may be off line. Press
ON LINE
to set the printer on line.
The edge guides may not be set correctly.
Adjust the guides so that the paper slides
freely in and out. If the edge guides are
too tight they cause the paper to bind; if
they are too loose, the paper may go into
the printer crookedly.
Paper is jammed in the printer. Follow
the instructions earlier in this chapter to
remove the paper jam.
The paper may be positioned too far to
the right. If this is the case, the printer
cannot sense the paper width or paper
end, and you may lose some data when
you print. Move the paper to the left
paper guide.
You may need to clean the paper path as
described in Chapter 5.
Troubleshooting
6-31