Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
The Control Panel
11
The Control Panel
Buttons, Lights, and
Messages
You can check the ink remaining and printer
status on the control panel.
Buttons
a. Power button
Turns the printer on or off.
b. Pause/Reset button /
❏ Stops printing temporarily, or restarts
printing if pressed when the printer is in the
pause mode.
❏ Clears print data in the printer memory if
pressed and held for 3 seconds.
❏ The printer returns to the READY state when
this button is pressed in the Menu mode.
c. Heater button
❏ Selects a heater type. From the right, Pre
Heater, Platen Heater, and After Heater are
displayed on the LCD panel. Select a heater
type, and then press the High Heat button or
Low Heat button to change the preset
temperature.
❏ Returns to the previous level when pressed in
the Menu mode.
d. Enter button
Sets the selected parameter in the selected item in
the Menu mode. Executes the item if the selected
item is for execution only.
e. Paper Feed button /
❏ Feeds the roll paper in the forward or
reverse direction.
❏ Changes the parameter in the forward or
reverse order when selecting a desired
parameter in the Menu mode.
❏ The numeric value is decreased or
increased during numerical input.
f. Menu button
❏ Enters the Menu mode when pressed in the
READY state.
See “Menu Mode” on page 14
❏ Enters the Printer Status menu if pressed
during printing.
See “PRINTER STATUS” on page 25
❏ When pressed in the Menu mode, a desired
menu can be selected.
❏ Performs Cleaning (Light) to clean the print
heads if pressed and held for 3 seconds.
g. Low Heat button
Decreases the preset temperature of the heater.
You can also change the preset temperature while
printing.
h. High Heat button
Increases the preset temperature of the heater.
You can also change the preset temperature while
printing.
e
h
g
e
c
b
a
d
f
Note:
When AUTO TAKE-UP REEL is ON in the Menu
mode, the roll paper cannot be fed in the reverse
direction.