Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
Handling Paper
42
Head height adjustment
Printing with high printing rate or using
strongly-curved paper can cause print heads to
rub. Changing the head height may allow you to
avoid head rub.
Follow the procedure below to change the head
height.
A
Open the front cover.
B
Change the head height by moving the
head height adjustment lever (blue).
High:
Normal:
Note:
❏ If the head height adjustment lever is raised, high
print quality is not guaranteed.
❏ Do not open the front cover or change the head
height during printing. If the head height is
changed, the alignment will be changed and high
print quality will not be guaranteed.
Note:
❏ Make sure that head height adjustment
lever is set to the correct position. The lever
may stop at wrong position as below.
❏ Do not raise the head height adjustment
lever higher than the correct High
position. Doing so may damage the
printer.
Wrong
Wrong
High
Normal