Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
Handling Paper
45
Using Auto Take-Up Reel Unit
Use the Auto Take-Up Reel Unit to roll up your
print so it will not be fed out onto the floor.
A
Turn on the power of the Auto Take-Up
Reel Unit.
B
Make sure the changeover switch is set to
OFF.
C
Set the front edge of the roll paper so that it
reaches the scroller.
See “Setting roll paper” on page 35
D
Adjust the position of the scroller using the
horizontal adjustment screw to set the roll
paper in the center of scroller.
E
Make sure that the roll paper is passed over
the cushioning roller and then tape the
leading edge to the scroller in the center.
F
Raise the scroller releasing lever.
The scroller raises from the drive unit.
Note:
If PAPER OUT error or PAPER SKEW error
has occurred when using Auto Take-Up Reel
Unit, the roll paper may not be rolled up
straight. This phenomenon can be avoided by
trimming both of the front edges when setting
the roll paper to the scroller.