Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
The Control Panel
20
PAPER SETUP
AUTO TAKE-UP REEL ON Use this setting when using the Auto Take-Up Reel Unit.
When ON is selected, you cannot feed the roll paper in
the reverse direction.
Note:
When the Auto Take-Up Reel Unit is not installed, please
do not set to ON. By doing so, the product will be unable
to function properly.
OFF
HEAD FAN OFF You can set up the head fan operation. If print blurring
or dot losses occur, select ON.
ON
REGULAR CLEANING OFF You can set the auto cleaning interval of this printer.
When more than the set time has passed since the
previous print job, the print head is cleaned
automatically to prevent it from clogging.
Note:
The timer will be reset at the following timing:
- when turning on the printer
- when changing the interval of the auto cleaning
- when performing the cleaning manually
1h, 2h, 3h, 4h, 5h, 6h,
9h, 12h, 18h, 24h
INITIALIZE SETTINGS EXECUTE You can return all setting values you have made in the
Printer Setup menu to their factory set value.
Item Parameter Explanation
PAPER TYPE STANDARD You can select the paper type to print.
PAPER No.1 - 30
PAPER SETUP STANDARD When you select STANDARD, the default settings are used.
When you select a number (between 1 to 30), you can
register the settings (such as Print Mode, Paper Feed
Adjust, Head Alignment, Pre Heater, Platen Heater,
After Heater, M/W Adjustment, Paper Suction, Drying
Time, Carriage Movement, Print Multiple Layer) or to
recall these settings you have made. The number you
select here is displayed on the LCD panel.
See “Details of PAPER SETUP” on page 21
PAPER No.1 - 30
Item Parameter Explanation