Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
Problem Solver
73
NO CARTRIDGE
INSTALL INK CARTRIDGE
No ink cartridge is
installed.
Install an ink cartridge correctly. Do not
reinstall the ink cartridge that caused an error.
See “Replacing Ink Cartridges” on page 56
INK CARTRIDGE ERROR
REPLACE CARTRIDGE
The ink cartridge was
found faulty. There
may be some bad
contact or dew
condensation in the
cartridge.
❏ Remove the ink cartridge and reinstall it. If
this message appears after reinstalling the
ink cartridge, replace it with a new one.
(Do not reinstall the ink cartridge that
caused an error.)
See “About ink cartridges” on page 56
See “Replacing ink cartridges” on
page 57
❏ Condensation may occur in the ink
cartridge so leave it at room temperature
for more than four hours before installing
the ink cartridge.
See “Notes for replacing the ink
cartridges” on page 57
INK CARTRIDGE
PLEASE USE GENUINE EPSON INK
CARTRIDGES
Non-genuine ink
cartridge is installed.
Replace the ink cartridge with a genuine
Epson ink cartridge.
See “About ink cartridges” on page 56
See “Replacing ink cartridges” on page 57
INK CARTRIDGE
NON-GENUINE CARTRIDGE MAY
NOT PERFORM AT OPTIMUM.
CONTINUE?
<YES NO>
Non-genuine ink
cartridge is installed.
Select NO (press the button) to replace the
ink cartridge with a genuine Epson ink
cartridge.
See “About ink cartridges” on page 56.
See “Replacing ink cartridges” on page 57
INK CARTRIDGE
THIS MAY VOID EPSON’S
WARRANTY.
DO YOU ACCEPT THIS?
<ACCEPT DECLINE>
Non-genuine ink
cartridge is installed.
This may void EPSON’s
warranty.
Select DECLINE (press the button) to replace
the ink cartridge with a genuine Epson ink
cartridge. Selecting ACCEPT (press the
button) may void EPSON’s warranty.
See “About ink cartridges” on page 56.
See “Replacing ink cartridges” on page 57
INK CARTRIDGE
REPLACE INK CARTRIDGE
The ink cartridge is
expended.
Replace the ink cartridge with a new one.
See “Replacing Ink Cartridges” on page 56
COMMAND ERROR
CHECK DRIVER SETTINGS
Damaged data has
been sent to the
printer.
Stop printing, and press the button for 3
seconds.
The printer receives
data with a wrong
command.
The installed printer
driver is not correct for
the printer.
Stop printing, and press the button for 3
seconds. Then make sure that the installed
printer driver is correct for the printer.
PAPER SKEW
LOAD PAPER PROPERLY
The paper is not
loaded straight.
❏ It may not be printed in the printable area
properly.
❏ Load the paper straight.
See “Using Roll Paper” on page 32
Error messages Description What to do