Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
Maintenance and Move or Transportation
58
D
Carefully pull the expended cartridge
straight out of the slot.
E
Make sure the replacement ink cartridge is
the correct color. Shake an ink cartridge
horizontally well (about 5 seconds) before
installing it for best results. Then, remove it
from the package.
F
Hold the ink cartridge with the arrow mark
facing up and pointing to the rear of the
printer, and then insert it gently into the
slot as far as it will go.
Make sure to match the ink cartridge color
with the color label on the slot.
G
Close the ink compartment cover.
w
Warning:
If ink gets on your hands, wash them
thoroughly with soap and water. If ink
gets into your eyes, flush them
immediately with water.
c
Caution:
Do not touch the green chip on the side of
the cartridge. Doing so may prevent
normal operation and printing.
Note:
Be sure to install all eight ink cartridges. You
cannot print if any of the ink cartridges is not
installed.