Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
Introduction
9
Introduction
Printer Parts
Front section
a. Front cover
Prevents a user from coming in contact with the
driving mechanism during the printer operation.
Open the front cover when you set paper or
remove jammed paper.
b. Paper holder plate
Installed inside of the front cover. By attaching
paper holder plates to both sides of the paper, it is
possible to prevent warpage.
c. Active indicator
Flashes when an error has occurred. See the error
message on the LCD panel to solve the problem.
d. Control panel
The control panel consists of buttons, lights, and a
liquid crystal display (LCD). Operation condition
setting, printer display and various function
settings are performed.
e. Maintenance cover
Prevents the user from touching the inner
mechanical section. Open and close the cover
when cleaning the cleaning wiper or when
cleaning around the print head. It is normally
closed.
f. Paper lever
Set or release the paper. Lower the lever to fix the
paper. Lower the lever more to fix the paper
firmly. Raise the lever to release the paper.
g. Ink drain tank
Collects waste ink discharged from the printer.
h. Stand
Use the stand when installing the printer on a
level floor.
i. Adjuster
Use the adjuster to fix the Stand.
j. AC inlet
Plug the power cords.
k. Auto Take-Up Reel Unit
Use the Auto Take-Up Reel Unit to roll up your
prints.
l. Paper guide
Use the paper guide for feeding paper smoothly
when the paper is set or printed. The heater (After
Heater) to dry ink is installed inside.
m. Platen
Installed inside of the front cover. The heater
(Platen Heater) to dry ink is installed.
n. Pressurizing rollers
Installed inside of the front cover. Press and hold
the paper when printing.
a
b
d
e
f
g
h
i
i
h
l
e
b
m
n
k
c
j