Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
Adjust Printing
49
D
Perform initial adjust print.
1. Press the / button to display PAPER
FEED ADJUST, and then press the button.
2. Press the / button to select LINE
FEED ADJUST, and then press the button.
3. Press the / button to select the feed
length from 100mm, 250mm, or 500mm. Then
press the button.
4. Press the button to print initial
adjustment.
After printing the initial adjustment, cut the
paper.
E
Measure the distance between the two
pluses in the initial adjustment print using
a ruler.
F
Set the initial adjustment value.
1. Press the / button to select the
measured value in step 4.
2. Press the button to save the initial
adjustment value.
G
Print a sample pattern.
1. Press the / button to select PRINT
SAMPLE PATTERN, and then press the
button.
2. Press the button to print a sample
pattern.
After printing the sample pattern, cut the
paper.
H
Refer to the illustrations below and check
the printing result.
Note:
If you increase the feeding length, the accuracy
of the paper feed adjustment improves;
however, it wastes the paper.