Filter
Top Products
EPSON Stylus Pro GS6000 User’s Guide
Handling Paper
32
Handling Paper
Using Roll Paper
This section explains how to handle the printer.
Loading roll paper
This section explains how to load roll paper.
Put the roll paper in the center.
A
Loosen the fixing levers on the right and left
side of the rear. Set the distance between
the roll paper holders wider than the roll
paper width.
B
Fix the roll paper holder (Left).
Note:
❏ See the following for details about handling paper.
“Paper” on page 40
❏ Do not open the front cover during printing. If
the front cover is opened, printing will be
interrupted. Printing restarts if you close the
front cover. However, you are not guaranteed to
have high print quality.
w
Warning:
❏ The roll paper is heavy so have two people set
the roll paper.
❏ Do not touch the paper guide during
printing. It is hot and may cause a burn.
❏ Do not touch the paper feed slot, platen, or
paper guide while heaters are operating.
They are hot and may cause a burn.
❏ Keep the work area well-ventilated. This
prevents fire, and stops operators from
feeling sick from bad smell or fumes.
❏ Do not store combustible materials on the
platen while performing the heater
operation. It could lead to fire.
❏ Do not spill flammable liquid over the
platen. This could lead to fire.
Note:
The following roll paper can be attached to the printer:
the core diameter is three inches, outside diameter of
paper is 150 mm or less, weight is 30 kg or less.