Filter
Top Products
ADVANCED OPERATIONS CONNECTING WITH ETHERNET
123
CONNECTING WITH ETHERNET
Network your MX-4 DV to a PC or a Macintosh using the included crossover cable. Copy the fol-
lowing to and from the MX-4 DV:
• Background and Foreground jpegs
• Operating software
To work on a standard Ethernet network, each MX-4 DV requires an unique IP address. This
address and associated information can be static (assigned and typed in), or dynamic (assigned by a
DHCP server). Do this by pressing the
SHIFT+SETUP/FTP buttons to access the ftp menu. The
example screen shot shown below represents the beginning setup screen to apply a static or
dynamic IP address.
To connect to a network (Static IP):
1 Power down the MX-4 DV.
2 Connect the MX-4 DV to your network with the included crossover cable to either a PCs or a
Macintosh computer.
3 Power up, and assign the IP and Mask. The Gateway and Password are not needed to perform
this function.
FOCUS Enhancements recommends you use one of the following IP address for static input:
• 192.168.0.2
• 192.168.0.3
• 192.168.0.4
NOTE
192.168.01 will not function in this system.
4 Reboot for the changes to take effect.