Filter
Top Products
MX-4 DV USER GUIDE CHAPTER 6
64
MOSAIC
Divides picture into tiles.
Parameter Values — Zero through nine. Zero turns off the
effect.
Low values create numerous, small tiles. High values create
fewer, larger tiles. Highest values might make image difficult
to recognize.
COLOR CORRECT
Adjusts overall color values throughout the entire image.
You can set Color Correction values separately for each channel.
Parameter Values — Zero or one.
0 = Off: 1 = On
CAUTION
Apply color correction BEFORE going live or rolling tape. Because of the way the MX-4 DV
implements color correction, the program output might be affected temporarily.
To use Color Correct:
1 Press COLOR CORRECT to display the Input Effects menu, or press EFFECTS then use the
ARROW keys to highlight the Color Correct icon.
2 Press the
NEXT button that corresponds to the source you want to correct. For example, to
apply color correction to channel C, press
NEXT/C.
3 Turn on the Color Correct option. That is, either press 1 on the keyboard, or press COLOR
CORRECT so the parameter value equals 1.
The MX-4 DV replaces the Input Effects menu with a preview of the color corrected image.
4 Use the
JOYSTICK to adjust the RGB (Red, Green, and Blue) values in the image.
5 Use the
T-BAR to adjust the luminance of the image. You can do fine-grained adjustment with
the arrow keys (and shift arrow keys), just like in the Learn color mode.
6 When the image looks the way you want, press
OK to exit from Input Effects mode.
COLOR NEG
Inverts all colors in the image.
Parameter Values — Zero or one.
0 = Off: 1 = On