Filter
Top Products
MX-4 DV USER GUIDE CHAPTER 9
94
6 Repeat steps 3 through 5 until your composition is complete.
7 Use the
PLAY button or T-BAR to send your composition to the program output.
PLAYING THE COMPOSITION
To play a composition on the output device:
• Press
PLAY or use the T-BAR.
Moving the T-BAR from the bottom-to-top in its slot transitions the composition to Program.
Moving it from top-to-bottom dissolves it out.
Pressing
PLAY produces a cut from the CURRENT source to the composed screen — using the
T-BAR produces a dissolve. Pressing PLAY or using the T-BAR again lets you switch back and forth
between the CURRENT source and the composed image.
To reposition the
T-BAR, hold down SHIFT while moving it. Holding down the SHIFT button tempo-
rarily disables the
T-BAR.
NOTE
If you cut to any source or exit from Compose mode, your composed screen will be lost and cannot
be recovered.
EXITING FROM COMPOSE MODE
Remember, if you do not record your composed image to the output device before exiting Com-
pose mode, your composed image will be lost and cannot be recovered.
To exit from Compose mode, press
COMPOSE.