Fujitsu BX600 Network Card User Manual


 
CLI Mode-based Topology Command
Reference
7 Command Reference
The Command Line Interface (CLI) syntax, conventions, and terminology are described in
this section. Each CLI command is illustrated using the structure outlined below.
7.1 CLI Command Format
Commands are followed by values, parameters, or both.
Example 1
ip address <ipaddr> <netmask> [<vlan-id>]
Ip address is the command name.
<ipaddr> <netmask> are the required values for the command.
[<vlan-id>] is the optional value for the command.
Example 2
snmp-server host <loc>
snmp-server location is the command name.
<loc> is the required parameter for the command.
Example 3
clear port-group
clear port-group is the command name.
Command
The text in bold, non-italic font must be typed exactly as shown.