Fujitsu BX600 Network Card User Manual


 
Overview Web-Based Management Interface
6.2.2.3.4 Downloading Specific Files to Panel Page
Use this menu to download a file to the Panel.
Configurable Data
File Type - Specify what type of file you want to download:
Script - specify configuration script when you want to update the IBP’s script file.
CLI Banner - Specify the banner that you want to display before user login to the IBP.
Code – Specify code when you want to upgrade the operational flash.
Configuration - Specify configuration when you want to update the IBP’s
configuration. If the file has errors the update will be stopped.
SSH-1 RSA Key File - SSH-1 Rivest-Shamir-Adleman (RSA) Key File
SSH-2 RSA Key PEM File - SSH-2 Rivest-Shamir-Adleman (RSA) Key File (PEM
Encoded)
SSH-2 DSA Key PEM File - SSH-2 Digital Signature Algorithm (DSA) Key File (PEM
Encoded)
SSL Trusted Root Certificate PEM File - SSL Trusted Root Certificate File (PEM
Encoded)
SSL Server Certificate PEM File - SSL Server Certificate File (PEM Encoded)
SSL DH Weak Encryption Parameter PEM File - SSL Diffie-Hellman Weak
Encryption Parameter File (PEM Encoded)
SSL DH Strong Encryption Parameter PEM File - SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded)
The factory default is code.
Note that to download SSH key files SSH must be administratively disabled and there can
be no active SSH sessions.
TFTP Server IP Address - Enter the IP address of the TFTP server. The factory default is
0.0.0.0.
TFTP File Path (Target) - Enter the path on the TFTP server where the selected file is
located. You may enter up to 32 characters. The factory default is blank.
TFTP File Name (Source) - Enter the name on the TFTP server of the file you want to
download. You may enter up to 32 characters. The factory default is blank.
TFTP File Name (Target) - Enter the name on the IBP of the file you want to save. You
may enter up to 32 characters. The factory default is blank.
Start File Transfer - To initiate the download you need to check this box and then select
the submit button.
Non-Configurable Data
The last row of the table is used to display information about the progress of the file
transfer. The screen will refresh automatically until the file transfer completes.
Command Buttons
Submit - Send the updated screen to the IBP and perform the file download.