Filter
Top Products
Overview Web-Based Management Interface
-Error (3): error conditions
-Warning (4): warning conditions
-Notice(5): normal but significant conditions
-Informational(6): informational messages
-Debug(7): debug-level messages
Command Buttons
Submit - Update the IBP with the values you entered.
Refresh - Refetch the database and display it again starting with the first entry in the
table.
Delete - Delete a configured host.
6.2.4.1.7 Configuring syslog configuration Page
Configurable Data
Admin Status -For enabling and disabling logging to configured syslog hosts. Setting this
to disable stops logging to all syslog hosts. Disable means no messages will be sent to
any collector/relay. Enable means messages will be sent to configured collector/relays
using the values configured for each collector/relay. Enable/Disable the operation of the
syslog function by selecting the corresponding line on the pulldown entry field.
Local UDP Port This is the port on the local host from which syslog messages are sent.
The default port is 514. Specify the local port in the text field.
Non-Configurable Data
Messages Relayed - The count of syslog messages relayed.
Messages Ignored - The count of syslog messages ignored.
Command Buttons
Submit - Update the IBP module with the values you entered.
Refresh - Refetch the database and display it again starting with the first entry in the
table.