Filter
Top Products
SNTP (Simple Network Time Protocol) Commands Command Reference
Privileged Exec
Display Message
If an IP address is not specified then only the Invalid Server Addresses field is displayed.
Otherwise, the other listed fields are displayed.
Invalid Server Addresses: The number of RADIUS Access-Response packets received
from unknown addresses.
Server IP Address: The IP address of radius server.
Round Trip Time: The time interval, in hundredths of a second, between the most recent
Access-Reply/ Access-Challenge and the Access-Request that matched it from the RADIUS
authentication server.
Access Requests: The number of RADIUS Access-Request packets sent to this server.
This number does not include retransmissions.
Access Retransmission: The number of RADIUS Access-Request packets retransmitted to
this RADIUS authentication server.
Access Accepts: The number of RADIUS Access-Accept packets, including both valid and
invalid packets, which were received from this server.
Access Rejects: The number of RADIUS Access-Reject packets, including both valid and
invalid packets, which were received from this server.
Access Challenges: The number of RADIUS Access-Challenge packets, including both
valid and invalid packets, which were received from this server.
Malformed Access Responses: The number of malformed RADIUS Access-Response
packets received from this server. Malformed packets include packets with an invalid length.
Bad authenticators or signature attributes or unknown types are not included as malformed
access responses.
Bad Authenticators: The number of RADIUS Access-Response packets containing invalid
authenticators or signature attributes received from this server.
Pending Requests: The number of RADIUS Access-Request packets destined for this
server that have not yet timed out or received a response.
Timeouts: The number of authentication timeouts to this server.
Unknown Types: The number of RADIUS packets of unknown types, which were received
from this server on the authentication port.
Packets Dropped: The number of RADIUS packets received from this server on the
authentication port and dropped for some other reason.
7.9.1.13 show tacacs
This command display configured information of the TACACS.
Syntax
show tacacs
Default Setting
None
Command Mode