Filter
Top Products
Compliance Statements Important Notes
6.2 Main Menu
6.2.1 Groups Administration
6.2.1.1 Managing Port Groups
6.2.1.1.1. Configuring Port Group Configuration Page
The purpose of the port group configuration page is to create port groups, and to modify the
existing port groups. Linkstate, port backup, and IGMP snooping of the port groups can be
configured in this page.
Selection Criteria
Group Name – Use this pull-down menu to select one of the existing groups.
Configurable Data
Group Name – Input the group name to create a new port group.
Link State – Use the pull-down menu to configure link state for the port group.
Port Backup – Use the pull-down menu to configure port backup for the port group.
Failback Time – The time delay to activate the active port if the link of active port is
resumed.
IGMP Snooping – Use the pull-down menu to configure IGMP snooping for the port
group.
Command Buttons
Submit – Update the IBP the values on this screen. If you want the IBP to retain the new
values across a power cycle, you have to perform a save.