Filter
Top Products
Supported
MIBs
Using SNMP
SSL HTTP Mode (Secure): Disabled
Secure Port: 443
Secure Protocol Level(s): TLS1 SSL3
802.1X Port Authent. disable
RADIUS Client disable
IGMP Snooping disable
802.3ad enable
SNTP Client disable
TACACS disable
StormControl enable
Link State disable
Port-Backup disable
SNMP
9.2
The
default
settings
for
all
the
configuration
commands
The default settings for all the configuration commands are shown in the following
table.
SB9 DEFAULT CONFIG
configure mode
Sntp sntp unicast client poll-interval 6
sntp unicast client poll-timeout 5
sntp unicast client poll-retry 1
sntp broadcast client poll-interval 6
sntp client port 123
sntp clock timezone Taipei 8 0 before-utc
logging buffered logging buffered
logging buffered wrap
no logging console
no logging syslog
no logging syslog port
Ip ip javamode
ip dhcp client-identifier text Default
(system clear config : ip dhcp client-identifier hex <MAC
address>)
no ip http secure-server
ip http secure-protocol TLS1 SSL3
ip http secure-port 443
ip http server
no ip ssh
ip ssh maxsessions 5
ip ssh timeout 5