Filter
Top Products
錯誤! 找不到參照來源。 Command Reference
7.11.11 reload
This command resets the IBP without powering it off. Reset means that all network
connections are terminated and the boot code executes. The IBP uses the stored configuration
to initialize the system. You are prompted to confirm that the reset should proceed. A
successful reset is indicated by the LEDs on the IBP.
Syntax
reload
Default Setting
None
Command Mode
Privileged Exec
7.11.12 configure
This command is used to activate global configuration mode
Syntax
configure
Default Setting
None
Command Mode
Privileged Exec
7.11.13 disconnect
This command is used to close a telnet session.
Syntax
disconnect {<0-10> | all}