Filter
Top Products
Management Commands Command Reference
If you want to remove this lock, this Blade server must not be managed by any Virtual IO
Manager. In order to release the lock without using the Virtual IO Manager issue the
command "no lock <lock_identifier>" for each lock identifier that is registered.”
Command Mode
Global Config
7.5.9.3 lock_reset
This command resets the IBP to unlock status, and restore all lock configuration.
Syntax
lock_reset
Default Setting
None
Command Mode
Global Config
7.5.9.4 show lock
This command displays the information which contented the lock status and the list of lock
identifiers that are registered. And displays the current lock message.
Syntax
show lock
Default Setting
None
Command Mode
Privileged Exec
Display Message
Lock Status: This field indicates the current lock status.
Lock Message: This field displays the message in the Web-GUI of the IBP when a lock is
set.
Identifier: This field specifies the registered “lock_identifier” with this lock.
State: The state may have the values of None, Normal, or Exclusive.