Filter
Top Products
Management Commands Command Reference
Port Backup:. This indicates port-backup is enabled or disabled.
External Active Ports: This indicates which ports are in active-port list.
External Backup Ports: This indicates which ports are in backup-port list.
7.4.7.2 Configuration Commands
7.4.7.2.1 port-backup
This command is used to enable or disable port backup for a port group
Syntax
port-backup <portGroupName>
no port-backup <portGroupName>
<portGroupName> - A string associated with port group as a convenience. It can be up to
32 alphanumeric characters, and can not be blank.
no - This command disable port backup for an existing port group.
Default Setting
None
Command Mode
Global Config
This command is used to set the failback time of port backup for a port group.
Syntax
port-backup <portGroupName> failback-time <value>
no port-backup <portGroupName> failback-time
<portGroupName> - A string associated with port group as a convenience. It can be up to
32 alphanumeric characters, and can not be blank.
<value> - Time value is range from 1 to 60 seconds. Default value is 60 seconds.
no - This command set the failback time to default value for the specific port group.
Default Setting
60
Command Mode
Global Config