Filter
Top Products
Management Commands Command Reference
This command is used to move a port from active-port list to backup-port list.
Syntax
port-backup
no port-backup
no - This command move the port to active-port list.
Restriction: users are not allowed to move the last member of active port to backup port.
Default Setting
None
Command Mode
Interface Config
7.4.8 Link State
7.4.8.1 Show Commands
This command display the linkstate information.
Syntax
show linkstate [<portGroupName>]
<portGroupName> - The name of a port group which user want to display.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Name: This indicates the name of port group.
Linkstate:. This indicates linkstate is enabled or disabled for this port group