Filter
Top Products
Overview Web-Based Management Interface
6.2.3.3 Defining Secure HTTP Configuration
6.2.3.3.1 Secure HTTP Configuration Page
Configurable Data
Admin Mode - This field is used to enable or disable the Administrative Mode of Secure
HTTP. The currently configured value is shown when the web page is displayed. The
default value is disabled.
TLS Version 1 - This field is used to enable or disable Transport Layer Security Version
1.0. The currently configured value is shown when the web page is displayed. The default
value is enabled.
SSL Version 3 - This field is used to enable or disable Secure Sockets Layer Version 3.0.
The currently configured value is shown when the web page is displayed. The default
value is enabled.
HTTPS Port Number - This field is used to set the HTTPS Port Number. The value must
be in the range of 1 to 65535. Port 443 is the default value. The currently configured value
is shown when the web page is displayed.
Command Buttons
Submit - Send the updated screen to the IBP. Changes take effect on the IBP but these
changes will not be retained across a power cycle unless a save is performed.
Download Certificates - Link to the File Transfer page for the SSL Certificate download.
Note that to download SSL Certificate files SSL must be administratively disabled.