Filter
Top Products
SNTP (Simple Network Time Protocol) Commands Command Reference
this port will retransmit an EAPOL EAP Request/Identity before timing out the supplicant.
The value will be in the range of 1 to 10.
Reauthentication Period: The timer used by the authenticator state machine on this port to
determine when reauthentication of the supplicant takes place. The value is expressed in
seconds and will be in the range of 1 to 65535.
Reauthentication Enabled: Indicates if reauthentication is enabled on this port. Possible
values are True or False.
Key Transmission Enabled: Indicates if the key is transmitted to the supplicant for the
specified port. Possible values are True or False.
Control Direction: Indicates the control direction for the specified port or ports. Possible
values are both or in.
7.9.1.6 show dot1x statistics
This command is used to show a summary of the global dot1x configuration and the dot1x
statistics for a specified port.
Syntax
show dot1x statistics <slot/port>
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port: The interface whose statistics are displayed.
EAPOL Frames Received: The number of valid EAPOL frames of any type that have been
received by this authenticator.
EAPOL Frames Transmitted: The number of EAPOL frames of any type that have been
transmitted by this authenticator.
EAPOL Start Frames Received: The number of EAPOL start frames that have been
received by this authenticator.
EAPOL Logoff Frames Received: The number of EAPOL logoff frames that have been
received by this authenticator.
Last EAPOL Frame Version: The protocol version number carried in the most recently
received EAPOL frame.
Last EAPOL Frame Source: The source MAC address carried in the most recently received
EAPOL frame.
EAP Response/Id Frames Received: The number of EAP response/identity frames that
have been received by this authenticator.