Filter
Top Products
SNTP (Simple Network Time Protocol) Commands Command Reference
<seconds>
no dot1x timeout {quiet-period | reauth-period | server-timeout | supp-timeout |
tx-period}
<seconds> - Value in the range 0 – 65535.
no - This command sets the value, in seconds, of the timer used by the authenticator state
machine on this port to the default values. Depending on the token used, the
corresponding default values are set.
Default Setting
reauth-period: 3600 seconds
quiet-period: 60 seconds
tx-period: 30 seconds
supp-timeout: 30 seconds
server-timeout: 30 seconds
Command Mode
Interface Config
7.9.4 Radius Configuration Commands
7.9.4.1 radius accounting mode
This command is used to enable the RADIUS accounting function.
Syntax
radius accounting mode
no radius accounting mode
no - This command is used to set the RADIUS accounting function to the default value -
that is, the RADIUS accounting function is disabled.
Default Setting
Disabled
Command Mode
Global Config