Fujitsu BX600 Network Card User Manual


 
Supported
MIBs
Using SNMP
username username defaultlogin defaultList
dot1x no dot1x system-auth-control
dot1x default-login defaultList
Radius no radius accounting mode
radius-server retransmit 4
radius-server timeout 5
telnet telnet sessions
telnet exec-timeout 5
telnet maxsessions 5
snmp-server snmp-server host 0.0.0.0 public
snmp-server community ipmask 0.0.0.0 public
snmp-server community ro public
snmp-server host 0.0.0.0 private
snmp-server community ipmask 0.0.0.0 private
snmp-server community rw private
snmp-server enable traps authentication
snmp-server enable traps linkmode
snmp-server enable traps multiusers
snmp-server enable traps stpmode
no snmp-server enable trap ospf
no snmp-server enable trap dvmrp
no snmp-server enable trap pim
mac-address-table mac-address-table aging-time 300
tacacs no tacacs
tacacs port 1 49
no tacacs key 1
no tacacs server-ip 1
tacacs timeout 1 3
tacacs retry 1 5
no tacacs mode 1
tacacs port 2 49
no tacacs key 2
no tacacs server-ip 2
tacacs timeout 2 3
tacacs retry 2 5
no tacacs mode 2
tacacs port 3 49
no tacacs key 3
no tacacs server-ip 3
tacacs timeout 3 3
tacacs retry 3 5
no tacacs mode 3
port-security no port-security
In-band
administration
ip address ip address protocol none
no ip address