Open as PDF
CHAPTER 7: ACCESS USING RADIUS CONFIGURING 802.1X WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 7–9
7.3 Configuring 802.1x with EnerVista Secure Web Management Software
To access the 802.1x configuration window,
Z Select the Configuration > Radius > Server menu item.
Z Select the server.
Do not enable RADIUS capabilities until you have ensured that the
ports are configured properly.
Z After the ports are configured, enable RADIUS.
Z Ensure that the port connected to the RADIUS server, or the
network where the RADIUS server is connected to, is not an
The following window shows the configuration of a RADIUS Server. Initially, the RADIUS
Services are disabled and the server IP address is set to 0.0.0.0.
Z Edit the server IP and secret to add a RADIUS server.