GE ML1600 Switch User Manual


 
CHAPTER 10: VLAN CONFIGURING TAG VLANS THROUGH THE COMMAND LINE INTERFACE
MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 10–17
Converting Port VLAN to Tag VLAN (continued)
ML1600(tag-vlan)##
show vlan type=tag
VLAN ID : 1
Name : Default VLAN
Status : Active
==============================
PORT | MODE | STATUS
==============================
9 | UNTAGGED | UP
10 | UNTAGGED | DOWN
11 | UNTAGGED | DOWN
12 | UNTAGGED | DOWN
13 | UNTAGGED | UP
14 | UNTAGGED | DOWN
15 | UNTAGGED | DOWN
16 | UNTAGGED | DOWN
VLAN ID : 10
Name : engineering
Status : Pending
==============================
PORT | MODE | STATUS
==============================
14 | UNTAGGED | DOWN
15 | UNTAGGED | DOWN
16 | UNTAGGED | DOWN
VLAN ID : 20
Name : sales
Status : Pending
==============================
PORT | MODE | STATUS
==============================
14 | UNTAGGED | DOWN
15 | UNTAGGED | DOWN
16 | UNTAGGED | DOWN
VLAN ID : 30
Name : marketing
Status : Pending
==============================
PORT | MODE | STATUS
==============================
14 | UNTAGGED | DOWN
15 | UNTAGGED | DOWN
16 | UNTAGGED | DOWN
ML1600(tag-vlan)## start vlan=all
All pending VLAN's started.
(continued on next page)
Note that the VLANs are not started as yet.
Adding the VLAN does not start it by
default.