GE ML1600 Switch User Manual


 
17–18 MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
SYSTEM EVENTS CHAPTER 17: MISCELLANEOUS COMMANDS
Table 17–2: Listing of Severity - sorted by Subsystem (Sheet 1 of 3)
Subsystem Description Severity
Alarm Alarm System Enabled I
Alarm Alarm System Disabled I
Alarm Alarm Raised %s I
Alarm Alarm cleared %s I
Auth Authentication Enabled I
Auth Authentication Disabled I
Auth Authentication Server Configured I
Auth Authentication Port Configured I
Auth Authentication Port Access Configured I
Auth Authentication Backend Configured I
Auth Authentication Re-Auth Configured I
Auth Authentication Triggered Re-Authentication I
Auth User %s Authorized on Port %u I
Auth User %s Unauthorized on Port %u I
Auth User %s Authenticated as %s I
Auth Set Address Age to %u I
Auth Authentication Module Initialization I
Bridge Bridging Module Initialization I
Bridge Switch Hardware Initialization I
Bridge MAC Address Table Initialization I
Event Event Log Module Initialization I
Event Event Log Full E
Event Failed to Log Event E
IGMP IGMP Enabled I
IGMP IGMP Disabled I
IGMP IGMP Querier Enabled I
IGMP IGMP Querier Disabled I
IGMP IGMP Module Initialization I
IGMP IGMP Group Created %s N
IGMP IGMP Group Deleted %s N
IGMP IGMP Self Querier N
IGMP IGMP Other Querier Found on Port %u N
LACP LACP Enabled I
LACP LACP Disabled I
LACP LACP Module Initialization I
LACP Port %u Added to Trunk %u N
LACP Port %u Deleted From Trunk %u N
LACP Port %u Set as Primary on Trunk %u N
LACP Loopback Detected on Port %u N
LACP Trunk %u is Deactivated N
Port Port %u Link Up I
Port Port %u Link Down I