GE ML1600 Switch User Manual


 
19–2 MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
REVISION HISTORY CHAPTER 19: APPENDIX
Table 19–3: Updates for Manual Revision A9
Section Description
General Manual revised to A9
General Firmware release revised to 2.0.x
1.2.1 Order Code table revised
5.5 IPv6 section added
5.4.2, 5.4.3, 5,4,4 Improved Configuration sections (3) added
Table 4-2 Corrections to table
Table 18-1 Add one new RAW to table - address 0716
Table 19–4: Updates for Manual Revision A7
Section Description
General Changes to reflect three new module offerings
General Manual revised to A7
Table 19–5: Updates for Manual Revision A6
Section Description
1.2.1 Change power supply ranges in Order Codes section
1.3.1 Description of Power Input Ranges in Input Voltage and Input
Current sections
1.3.2 Operating Environment standards: IEC 60068-2-1, IEC 60068-2-2
1.3.4 Add UL information; add listed/recognized
CE standard EN50082-1; remove EN55024:1998
2.1.1 Change temperature ratings
3.4.1 Add chassis ground symbol to second note
3.4.4 Revised picture
3.4.2 Add note #7 (For AC and HI powered units...) to section
12.1 Remove Link Loss Learn section
General Firmware Revision updated to 1.7.x
General Manual revised to A6
Table 19–6: Updates for manual revision A5 (Sheet 1 of 2)
Page
(A4)
Page
(A5)
Change Description
Title Title Update Manual number to GEK-
113041D
1-2 1-2 Update Updated Ordering section
1-3 1-3 Update Updated Power Supply
specifications
3-5 3-5 Update Updated Electrical installation
section