Filter
Top Products
8-15
Troubleshooting
Using the Event Log To Identify Problem Sources
Troubleshooting
To Change the Severity Level of Event Log Messages
In its default setting, the Event Log displays all event levels. If you want to
change the severity level for which events will be displayed in the Event Log,
change the setting for the Displayed Events parameter in the Console/Serial
Link screen. Options include:
1. From the Console Main Menu, Select...
2. Switch Management Access Configuration (IP, SNMP, Console)...
4. Console/Serial Link Configuration
Severity
Level
Event Log Action
All (default) Display all events.
None Display no events.
Not INFO Display all events except
informational-only events.
Critical Display only critical-level events.
Debug Reserved for HP internal use only.