Filter
Top Products
123
Changing Your Workstation’s Hardware Configuration
Installing Storage Devices
Storage Device Cable Routing
When you install your storage device, be aware of the suggested cable rout-
ing paths as indicated in the cable routing label that is affixed to the top of
the storage tray.
Disk Shield
If you are installing a hard disk manufactured by Hewlett-Packard, you need
to install a disk shield.
1 Check the manufacturer’s labeling on the disk drive to determine if it is a
disk manufactured by Hewlett-Packard.
If the disk is not a Hewlett-Packard disk, skip the rest of this procedure.
2 From the accessory hardware kit which came with your workstation, lo-
cate the disk shield and four screws. See Figure 23.
3 Use the four screws to mount the disk shield on the drive, as shown in Figure 23.
Figure 23 Mounting the Disk Shield