Filter
Top Products
168
SCSI Connections
Assigning SCSI Device IDs
Assigning SCSI Device IDs
Before assigning a SCSI device ID to your drive, you need to check your
existing SCSI device IDs. To determine which SCSI device IDs are available
for your device, use the ioscan command in a terminal window:
1 Click on the Terminal Control on the Front Panel of your Workspace.
A terminal window opens.
2 Move the mouse cursor into the terminal window and single-click the left mouse
button.
3 If you are using HP-UX 9.05 or greater, enter the following at the prompt
/etc/ioscan -d scsi
After a few moments the ioscan utility lists all of the SCSI I/O devices it could
find. The list should appear similar to the following:
H/W Path Description Status
=====================================
2.0.1.2.0 cd-rom_drive ok(nnnnnnnn)
Terminal Control