Filter
Top Products
197
The Boot Console Interface
Displaying the Status of the EISA Slots
Displaying the Status of the EISA Slots
The eisa command lets you identify all EISA cards currently installed on
your workstation by showing you the current status of your workstation’s
four EISA slots. It is available only in the Information Menu.
To use the eisa command from the Information Menu of the boot console
interface, type:
Information Menu: Enter command > eisa
The following table appears:
Slot # Slot State Device Information
------- ------------ --------------------
1 Empty Empty
2 Unconfigured HWP1850
3 Empty Empty
In the table above, “Slot #” is the slot number as seen on the back of your
workstation; “Slot State” is the current state of any card in each slot; and
“Device Information” is the compressed EISA ID, read from the EISA card
itself.