Fuser
CAUTION: The fuser might be hot. Allow enough time after turning off the product power for the fuser
to cool.
NOTE: The product detects a new fuser using a fusible link that blows after 100 pages have been
printed. If a new fuser is installed for troubleshooting purposes, be sure to remove it before printing 100
pages.
1. Open the right-door assembly.
Figure 2-18 Remove the fuser (1 of 2)
2. Grasp the handles and squeeze the blue release levers.
Pull the fuser straight out of the product to remove it.
Figure 2-19 Remove the fuser (2 of 2)
ENWW Customer self repair (CSR) components 85