Filter
Top Products
Calibrate the product
Calibration is a product function that optimizes print quality. If you experience any image-quality
problems, calibrate the product.
1. Press the Home button
.
2. Press the down arrow
to highlight the CONFIGURE DEVICE menu, and then press the OK
button.
3. Press the down arrow
to highlight the PRINT QUALITY menu, and then press the OK button.
4. Press the down arrow
to highlight the FULL CALIBRATE NOW or QUICK CALIBRATE NOW
setting, and then press the OK button.
●
FULL CALIBRATE NOW: takes about three minutes and performs color plane registration,
drum speed adjustment, and Dmax and Dhalf adjustments. Use FULL CALIBRATE NOW if
colors are misaligned or appear blurry. FULL CALIBRATE NOW runs automatically after a
new transfer belt is installed. FULL CALIBRATE NOW must be run manually after a laser
scanner is replaced.
●
QUICK CALIBRATE NOW: takes approximately 1 minute and performs Dmax and Dhalf
calibrations. Use QUICK CALIBRATE NOW if colors are wrong, highlights are missing, or if
colors are too dark or too light.
ENWW Tools for troubleshooting 313