Toner-collection sensor and scanner-thermistor assembly
Before proceeding, remove the following components:
●
Toner-collection unit. See
Toner-collection unit on page 76.
●
Upper-left cover. See
Upper-left cover on page 96.
●
Power-supply cover. See
Power-supply cover on page 98.
●
Left cover. See
Left cover on page 99.
Remove the toner-collection sensor and scanner-thermistor assembly
1. Remove four screws (callout 1), and then remove the sheet-metal plate (callout 2).
Figure 2-108 Remove the toner-collection sensor and scanner-thermistor assembly (1 of 3)
1
2
ENWW Internal assemblies 141