D fuser delivery sensor
1. Open the right-door assembly.
2. Lower the secondary transfer assembly.
3. Remove the fuser, and then verify that the sensor flag on the fuser moves freely. If the sensor flag
does not move freely, replace the fuser. See
Fuser on page 85.
Figure 3-7 Test the fuser delivery sensor (1 of 2)
4. Insert a piece of paper to activate the fuser delivery sensor.
Figure 3-8 Test the fuser delivery sensor (2 of 2)
5. Check the control-panel display for a sensor response.
6. If there is no response, replace the fuser delivery sensor.
ENWW Tools for troubleshooting 249