Filter
Top Products
Description Recommended action
WAIT FOR PRINTER TO REINITIALIZE This message can appear for a variety of
reasons:
●
The RAM DISK settings changed before
the product has restarted.
●
The product is restarting after changing
external device modes.
●
Diagnostics has been exited.
●
A new formatter has been installed with
an old engine or a new engine has been
installed with an old formatter.
No action is necessary.
WAITING FOR TRAY <X> TO LIFT The specified tray is lifting paper for feeding. No action is necessary.
WARMING UP The product is coming out of Sleep mode. No action is necessary.
WRONG CARTRIDGE IN <COLOR> SLOT The indicated slot for a print cartridge
contains a cartridge that is not the correct
color. From left to right, the print cartridges
should be installed in this order:
●
Yellow
●
Magenta
●
Cyan
●
Black
Remove the print cartridge from that slot, and
install a cartridge that is the correct color.
YELLOW CARTRIDGE LOW The product indicates when a supply level is
low. Actual print cartridge life might vary. You
do not need to replace the print cartridge at
this time unless print quality is no longer
acceptable.
If print quality is no longer acceptable, replace
the print cartridge. Consider purchasing a
replacement cartridge so it is available when
the installed cartridge has reached the end of
its estimated life. See
Print cartridges
on page 74.
YELLOW CARTRIDGE LOW
LESS THAN XXXX PAGES
The product indicates when a supply level is
low. Actual print cartridge life might vary. You
do not need to replace the print cartridge at
this time unless print quality is no longer
acceptable. Estimated pages remaining is
based upon the historical page coverage of
this product.
If print quality is no longer acceptable, replace
the print cartridge. Consider purchasing a
replacement cartridge so it is available when
the installed cartridge has reached the end of
its estimated life. See
Print cartridges
on page 74.
Table 3-14 Control-panel messages (continued)
374 Chapter 3 Solve problems ENWW