3. Remove two screws (callout 1), one static wire (callout 2), and one switch (callout 3).
Figure 2-211 Remove the fuser-drive assembly (3 of 7)
2
1
3
4. Release one tab, and then slide the wire harness holder (callout 1) to release it from the fuser-drive
assembly.
NOTE: Releasing the wire harness provides clearance when the assembly is removed. The
harness does not need to be removed.
Figure 2-212 Remove the fuser-drive assembly (4 of 7)
1
ENWW Internal assemblies 213