Delivery fan
Before proceeding, remove the following components:
●
Upper-left cover. See
Upper-left cover on page 96.
●
Front-top cover. See
Front-top cover on page 100.
●
Rear-top cover. See
Rear-top cover on page 102.
Remove the delivery fan
1. Remove one screw (callout 1), disconnect one connector (callout 2), and release one wire retainer
(callout 3).
Figure 2-111 Remove the delivery fan (1 of 2)
2
1
3
TIP: When the fan is reinstalled, the air must flow into the product. Check the arrows embossed
on the fan frame that indicate air flow direction.
ENWW Internal assemblies 143