Controller PCA (optional paper feeder)
Before proceeding, remove the following components:
●
Rear cover (optional paper feeder). See
Rear cover (optional paper feeder) on page 218.
Remove the controller PCA (optional paper feeder)
1. 1 x 500-sheet optional paper feeder only: Disconnect four connector (callout 2), and then remove
two screws (callout 1). Release three tabs (callout 3), and then remove the PCA (callout 4).
Figure 2-240 Remove the controller PCA (optional paper feeder) (1 of 2)
4
1
2
3
2. 3 x 500-sheet optional paper feeder only: Disconnect all connectors, and then remove two
screws (callout 1). Release three tabs (callout 2), and then remove the PCA (callout 3).
Figure 2-241 Remove the controller PCA (optional paper feeder) (2 of 2)
1
2
3
232 Chapter 2 Removal and replacement ENWW