HP (Hewlett-Packard) CN583A#B1H All in One Printer User Manual


 
3. Change the Distinctive Ring setting to match the pattern that the telephone company assigned
to your fax number.
NOTE: By default, the printer is set to answer all ring patterns. If you do not set the
Distinctive Ring to match the ring pattern assigned to your fax number, the printer might
answer both voice calls and fax calls or it might not answer at all.
TIP: You can also use the Ring Pattern Detection feature in the printer’s control panel to
set distinctive ring. With this feature, the printer recognizes and records the ring pattern of
an incoming call and, based on this call, automatically determines the distinctive ring pattern
assigned by your telephone company to fax calls. For more information, see
Change the
answer ring pattern for distinctive ring.
4. (Optional) Change the Rings to Answer setting to the lowest setting (two rings).
5. Run a fax test.
The printer automatically answers incoming calls that have the ring pattern you selected (Distinctive
Ring setting) after the number of rings you selected (Rings to Answer setting). The printer begins
emitting fax reception tones to the sending fax machine and receives the fax.
If you encounter problems setting up the printer with optional equipment, contact your local service
provider or vendor for further assistance.
Case E: Shared voice/fax line
If you receive both voice calls and fax calls at the same phone number, and you have no other office
equipment (or voice mail) on this phone line, set up the printer as described in this section.
Back view of the printer
3
2
1
1 Telephone wall jack
2 Use the phone cord supplied in the box with the printer to connect to the
1-LINE port.
You might need to connect the supplied phone cord to the adapter
provided for your country/region.
3 Telephone (optional)
Set up faxing (parallel phone systems) 179