Filter
Top Products
5. A message appears stating that this setting should not be changed unless you have
multiple numbers on the same telephone line. Touch Yes to continue.
6. Do one of the following:
• Touch the ring pattern assigned by your telephone company to fax calls.
- Or -
•Touch Ring Pattern Detection, and then follow the instructions on the printer’s
control panel.
NOTE: If the Ring Pattern Detection feature cannot detect the ring pattern or if
you cancel the feature before it finishes, the ring pattern is automatically set to
the default, which is All Rings.
NOTE: If you are using a PBX phone system that has different ring patterns for
internal and external calls, you must call the fax number from an external number.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is
Tone. Do not change the setting unless you know that your phone line cannot use tone
dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type
1. Touch
(right arrow), and then touch Setup.
2. Touch Fax Setup, and then touch Basic Fax Setup.
3. Touch
(down arrow), and then touch Tone or Pulse Dialing.
4. Touch to select Tone Dialing or Pulse Dialing.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not answer
or was busy, the printer attempts to redial based on the settings for the busy-redial and
no-answer-redial options. Use the following procedure to turn the options on or off.
• Busy redial: If this option is turned on, the printer redials automatically if it receives
a busy signal. The factory-set default for this option is On.
• No answer redial: If this option is turned on, the printer redials automatically if the
receiving fax machine does not answer. The factory-set default for this option is
Off.
To set the redial options
1. Touch
(right arrow), and then touch Setup.
2. Touch Fax Setup, and then touch Advanced Fax Setup.
3. Touch Busy Redial or No Answer Redial, and then select the appropriate options.
Set the fax speed
You can set the fax speed used to communicate between your printer and other fax
machines when sending and receiving faxes.
Chapter 5
62 Fax