Filter
Top Products
Clean the Media Rollers 6-7
Clean the Media
Rollers
There is one input media roller and one output media roller,
located on the corresponding sides of the printer.
To clean, wipe the media rollers with a lint-free cloth. To remove
ink, wipe with a minimal amount of isopropyl alcohol, and dry
thoroughly before printing again.
Caution DO NOT ALLOW ISOPROPYL ALCOHOL TO
TOUCH THE PRINTHEADS, especially the inkjet
orifice plates. Contact with the ink could cause the
ink to coagulate, rendering the printhead unusable
and requiring it to be replaced. Be sure that cleaned
surfaces have dried before printing.