Filter
Top Products
4-22 Manual Calibrations
tendency of the media advance to gradually decrease as the
size of the supply roll decreases.
You can pause and resume the printing of the stitch pattern.
34-inch (900 mm) calibration — prints a 34-inch (or 900
mm) test pattern so you can verify its length with an accurate
metal ruler. Cut the pattern from the media web, then mea-
sure and adjust the media advance as needed until the pat-
tern is exactly 34 inches (900 mm) long.
10-inch (250 mm) calibration — prints a 10-inch (or 250
mm) test pattern so you can verify its length with an accurate
metal ruler. This is not as precise as the 34-inch (900 mm)
calibration, but it uses less media. Measure and adjust the
media advance as needed until the pattern is exactly 10
inches (250 mm) long.
Fig. 4-5. Measure between the calibration marks