Filter
Top Products
UV Lamp Operation and Maintenance 6-17
UV Lamp Operation
and Maintenance
For an overview of the UV lamp system, see “UV Lamps” on
page 3-3.
This section covers the following topics:
• Operating Tips (page 6-18)
• Replacing UV Lamp Bulbs (page 6-19)
• Balancing Lamp Hours (page 6-19)
WARNING UV light hazard. Excess exposure to high-intensity
UV light can result in photokeratitis (also known as
snow blindness or welder’s flash). AVOID LOOK-
ING DIRECTLY AT THE UV LIGHT.
VORSICHT UV Licht hoher Intensität. Bitte vermeiden Sie es,
direkt in die Lampen zu schauen.
Caution Failure to allow the lamps to cool down properly will
damage the lamps. If you disconnect the power
cable from the back of the printer or disconnect the
green power cable from the lamp assembly before
the cool down sequence has finished, you will dam-
age the lamps.